Add fancy felt soles with no-slip grips to your favorite crocheted slippers!
Crocheted slippers are one of my favorite cozy DIY projects. But, since I work out of my home studio, mine always get a whole lot of wear. (That’s great for my toasty toes, but not so awesome for the yarn under my feet.) So to protect my handmade work—and to prevent slips on hardwood and tile—I made a set of custom slipper soles, and now you can too. Make a pair of your own with this fancy felt sole tutorial! (For the knit-and-purl crowd, this tutorial will work with knitted slippers too.)
* A pair of crocheted or knitted slippers
* A pair of well-fitting shoes
* Several large sheets of scrap paper (plain copy paper works fine)
* 3mm thick wool felt (an 18" x 18" piece should be plenty for most shoe sizes)
* MATTE® dimensional fabric paint, one 1.25oz tube
* Bulky-weight yarn in a contrasting color, 2-3 yards
**Please note that the links provided above are affiliate links, and I will be compensated if you choose to make a purchase after clicking through.**
Want to make a pair of slippers just like mine? Here are the tutorials that you’ll need to get the job done:
Grab a pair of well-fitting shoes, then use a marker to trace the shape of the sole onto a piece of scrap paper. Cut out the template with a pair of paper scissors.
Note: If your soles are particularly chunky or wide, make your template slightly smaller by measuring in ½" or so from the edge and marking a new line all the way around the sole. To make sure that the re-sized template will fit, ensure that your bare foot fits within the new line before cutting it out.
Starting ⅛" in from the edge, place a dot every ½" around the edge of the sole. At each dot, punch a hole in the paper using the paper punch.
Trace the template you created in steps 1 and 2 onto the wool felt, then flip the template over (for the opposite foot) and trace that onto the felt as well. Cut out each sole with fabric scissors.
Place the template on top of each sole. Mark each hole around the sole with the chalk pencil. (Use a twisting motion with the pencil to make marks on the felt.)
Use the leather punch or tailor’s awl to punch a hole at each mark from step 4.
Arrange both soles on top of a layer of scrap paper, then use masking tape to create lines on each sole.
Use the sponge brush to apply a thick layer of fabric paint to each exposed line. Apply 4 layers of paint in total, allowing the paint to dry for a few minutes between each layer.
Let the paint dry overnight before moving on to the next step.
With the painted sides facing down, stretch the slippers out evenly over the soles, pinning them in place with safety pins at regular intervals.
Starting on the inside of the back of the the heel, use the darning needle and yarn to backstitch through each hole, attaching the slippers to the soles. (The first stitch should start from the inside of the slipper, leaving a 3-4 inch tail.)
Once you’ve stitched all the way around the slipper and back to the heel, pull the darning needle through to the inside of the slipper on the last stitch, then tie the two ends of yarn together. Trim any extra yarn length and weave in the ends.
You’re done! Enjoy your comfy, reinforced slippers with no-slip grips!
Ready to make a pair?